How to Fix Verizon Fios Yellow light Issues

10 Min Read
Verizon Fios Yellow light

Verizon Fios Yellow light: Verizon device LEDs employ a variety of colors to signify various statuses, including white, blue, green, yellow, and red. Each color represents a particular mode of operation, defect, and so on.


Verizon Fios Yellow light

A solid yellow light on your Verizon Fios router indicates that no internet connection is available.

When this happens, check the Ethernet connection and broadband wires, or reset the router.

If none of these alternatives work, contact Fios assistance to re-establish the connection.

A bright yellow light on your Verizon Fios extender indicates that it is in pairing mode, and the blinking lights vary in speed based on the distance between the extender and the router, allowing you to locate the correct position for the extender.


How to fix Fios Router Blinking Yellow Light

When your router lights yellow, try to do the following methods


Restart the Router

When your internet connection is down, the first thing you should do is reboot or restart your router.

To restart your Verizon router, follow these steps:

  • Turn off your router’s power. If your router has a backup battery, make sure you disconnect and reconnect it.
  • Wait 30 seconds before resuming power and allowing the router to boot up (indicated by the LED blinking in white color).


Rebooting almost always resolves the connectivity problem.

The yellow internet light will turn solid white, indicating that your Internet connection has been restored.

  • Examine your router to see if it is overheating.
  • Your internet access will suffer if your router overheats.
  • Overheating the router can cause internet interruptions, lower internet speed, and other issues.
  • Turning off the router’s power supply will allow it to cool down.
  • Disconnect your router from any backup batteries, inverters, and so on.
  • You can also relocate the router to a location with adequate airflow to prevent it from overheating.


Examine the Ethernet and Broadband Cables

This reminds me of something. I lost internet access at home a few months back, on an unexpected morning.

I checked the router and noticed that the status light was yellow. I reset my router, but nothing changed.

Next, I investigated the rear of my router to see whether an animal, most likely a rat, had broken both my Ethernet and Broadband wires.

I had to call a technician to come to replace the cords. The connection was restored as soon as the repairman reconnected the cables.

So, the following step should be to ensure that the cables leading to your router are in good condition.

Ethernet and fiber optic cables, which allow you to connect to the Internet, are typically found at the rear of your router.

Check to see if both of these cables are still in good condition. Long-term use can also cause wear and strain on the cables.

As a result, replacing these cables every few years is advised.

While inspecting the cable for damage, ensure that the cables are not loosely connected to the router.

If the connections are slack, you can either tighten them yourself or contact technical support.


How to resolve the Yellow Light on a Fios Extender

Yellow Light Constant
When in wifi mode, the extender will light up solid yellow to signal that it is ready to couple with the Fios router.

To continue the connection, press and hold the router and extender’s front buttons for at least 5 seconds.

While the connection is established, the lights on both devices will begin to blink blue.


Yellow Light That Blinks

The blinking yellow light indicates the distance between the extender and the router. When the blink rate increases, the extension is too close to the router.

When the blinking slows, it indicates that the extension has moved too far away from the router.

The blinking yellow light will go away once you find the optimal distance between the extender and the router.


Solving the Yellow Light on the G3100 Router

The G3100 router’s yellow light indicates that the internet connection has been lost.

This can be caused by a multitude of factors, such as a service provider issue, bad weather, or mice chewing on your cables.

Because there are numerous explanations for why this occurred, there are numerous solutions, the majority of which are simple.

First, restart your router. If it still does not work, reset the router by holding down the reset button and resetting it.

If none of this works, it is most likely due to a provider or hardware issue.

The best course of action would be to contact Fios customer service and explain your problem.


Contact Fios Customer Service.

If the above methods fail, you must contact your Internet Service Provider.

Every now and then, maintenance must be performed at the ISP’s end for a little period of time, during which the Internet will be unavailable.

In such circumstances, the service provider would normally notify you in advance of such interruptions.

So, if you are not warned of a maintenance break and your Internet is down, you should contact your ISP.

Unfortunately, there is no other option but to wait out this maintenance break.


See also How to Fix Verizon Fios Router Blinking Blue light


Remarks on Verizon Fios Yellow light

You can reset your Verizon router if none of the following options work. Many of your internet problems will be resolved by resetting.

You can reset your router by continually pushing the reset button on the back of your router for 20 seconds.

It will take a few minutes for the computer to reboot.

After the reboot, your internet connection will be restored.

When prepared to perform a factory reset, make sure you have your login credentials on hand so that resetting your router is simple.


Will resetting the router disrupt the Internet connection?
Resetting your router will return it to factory settings, requiring you to set the password, enter your credentials, and configure your internet settings from scratch, among other things.
Aside from that, rebooting the router has no effect on your Internet connection.


Resetting offers various additional advantages:

  • It will delete all of your device’s undesirable cache data.
  • It will put an end to any ongoing attacks by hackers or other hostile agents.

The sole disadvantage of resetting the router is that it will return to its factory configuration.


Getting your Internet back is only the beginning of the battle.

If you’ve tried everything above and it’s still not working, you should presume that the router has to be repaired.

Request technical assistance as soon as possible so that you can have your router back up and running.

To be safe, wrap your Ethernet and Broadband wires in protective sheathing to keep mice, insects, and other critters from damaging them.

Perform routine checks to verify that the cables’ safety is not jeopardized.


Either you should upgrade the older Router

When to upgrade the router?
Routers frequently exhibit flaws in their operation, such as reduced internet speed, abrupt disconnecting, a decrease of signal strength in various areas, or, in the worst case, they stop working entirely.
When this happens, it signifies it’s time to get new router.


What color should my Verizon FiOS router’s status light be?
For typical operation, the status light on your Verizon router should be white.
Blinking blue shows that the router is ready to pair, while steady blue indicates that the pairing was successful.



Thank you for reading. We believe our team has provided helpful information. 


Share this Article
Leave a comment